Low Air Pressure DTH Hammer for Efficient Drilling
A low air pressure DTH hammer is a pneumatic down-the-hole hammer in which a piston driven by compressed air strikes the bit up to 1,500 times per minute, used for water wells, mining, quarrying and geothermal drilling. Ranking Bit makes low air pressure DTH hammers in 5 body sizes covering 76 to 200 mm holes, with a hardened alloy-steel cylinder and interchangeable wear parts.
DTH Hammers are rock drilling tools which takes compressed air as power source to partially transfer impact power into drilling holes.
An impact device arranged in the front of the top hammer transfers the impact power to a down-the-hole bit to crush rocks.


CIR 76

CIR 90

CIR 110
How are low air pressure DTH hammers engineered and tested?






Own factory
From the grinding of each part to the field use of the equipment, each Low Air Pressure DTH Hammer is developed and designed in our own factory!
Skip the middleman! Pick your Low Air Pressure DTH Hammer directly from our factory!

Where are low air pressure DTH hammers used?
Some real feedback from our customers!



Feedback
Marc Dupont
Ana Silva
Thabo NkosiNeed Help?
Understanding Low Air Pressure DTH Hammers
What is a Low Air Pressure DTH Hammer?
It’s a type of hammer used for drilling in soft to medium rock formations with low air pressure systems.
What are the main uses of this hammer?
It’s used in mining, construction, and water well drilling.
How does it work?
It uses compressed air to drive the hammer and break rock efficiently.
What types of rock can it drill through?
It’s effective on softer rock types, such as sandstone and limestone.
Performance and Efficiency
Is it more fuel-efficient than high air pressure hammers?
Yes, it consumes less air and energy, making it more fuel-efficient.
Does it drill faster than other hammers?
It’s highly efficient in soft to medium rock, helping speed up drilling time.
How well does it work in deep drilling?
It’s designed for shallow to medium depth drilling, not ideal for very deep holes.
How does it handle drilling in mixed ground?
It performs well in mixed ground, though its efficiency decreases in very hard rock.
Compatibility and Usage
What drilling rigs can use the Low Air Pressure DTH Hammer?
It’s compatible with most rigs that support low air pressure systems.
Is it suitable for dry drilling?
Yes, it can be used in dry drilling conditions, but it’s most effective with air or water circulation.
Can it be used for directional drilling?
Yes, it works well for directional drilling in soft to medium rock formations.
Do I need special tools to use it?
No, it’s compatible with standard DTH drill tools and rigs.
Maintenance and Durability
How often should I maintain the Low Air Pressure DTH Hammer?
Regular maintenance after every few uses will extend its life and efficiency.
How do I clean the hammer?
Clean it by removing debris and lubricating the moving parts.
How long does it last?
With proper maintenance, it can last for many drilling projects.
Does it require a lot of repairs?
No, it’s durable and designed for long-term use with minimal repairs.
What standards and sources back this guide?
Written and reviewed by Amanda Chen, founder and CEO of Ranking Bit, a rock bit manufacturer in Hebei, China, supplying drill bits to contractors in more than 60 countries. Last reviewed .
Where a statement rests on an outside definition or an industry standard, we point to the primary source instead of paraphrasing it:
- SLB Energy Glossary — the industry reference definition of a low air pressure DTH hammers, the tool family these bits belong to.
- API standards — American Petroleum Institute specifications covering drill stem elements, threads and downhole equipment.
- IADC — the International Association of Drilling Contractors, source of the bit classification and drilling terminology used on this page.
- USGS Mineral Commodity Summaries — tungsten supply and production data behind the material discussion above.
Key figures for low air pressure DTH hammers
- 5 standard sizes: 76-90, 90-110, 110-130, 130-152, 152-200 mm
- Working diameter range 76-200 mm, custom sizes on request
- Custom drawings and quotations within 6 hours
- Standard sizes ship from stock; sales replies within 24 hours
Editorial note: the answers on this page describe the standard construction of the bit shown. Bit specification, make-up torque and operating parameters must still be confirmed against the individual bit data sheet and your rig’s operating envelope before the bit goes in the hole.
“A low air pressure DTH hammer is a pneumatic down-the-hole hammer in which a piston driven by compressed air strikes the bit up to 1,500 times per minute, used for water wells, mining, quarrying and geothermal drilling.”
— Ranking Bit engineering team


